Flint Ink UK Ltd, Wolverhampton

A local project and a site we have done work for in previous years. ESH were contracted to supply and install a trace heating system to maintain steel pipework and two tanks at a temperature of +70ºC. The tanks comprised of a holding tank and a pre-mix tank, both 2.2m diameter and 3.5m tall. In total the system required over 300 metres of type SCB30/2 constant wattage heating cable.

Stepan UK, Cheshire

The project scope here was to design, supply and install a trace heating system to temperature maintain three sections of pipework at +30ºC and +10ºC respectively. Almost 500 metres of type FBTBOJ20/2 self regulating heating cable was installed and controlled using multiple digital thermostats and control panels.

* Type FBT Self Regulating Heating Cable *

University Hospital Of Wales, Cardiff

Supplied and installed a trace heating system to temperature maintain hot water pipework at a minimum of +55°C. Type H2OWAT55 self regulating heating cable was straight traced onto the copper pipework.

* Type H2OWAT Self Regulating Cable *

West Engineering Ltd, Ipswich

ESH supplied and installed three hopper trace heating systems utilising our type VCBOJ20/2 constant wattage heating cable.

Project Ogre (Riverside Building), London

ESH were contracted to repair four runs of frost protection heating tape originally installed by others, on two chilled water pipes and two heating pipes.

Plaxica (Wilton Centre), Redcar

ESH were asked to test a damaged circuit and if necessary remove and replace. The damaged circuit, caused by others, had to be replaced with mineral insulated hazardous area constant wattage heating tape.

* Hazardous Area Trace Heating *

5 Hyde Park (Rackspace Ltd), London

This was ESH's first project here at Rackspace's ultra modern UK headquarters. Part one, of this two part project, saw ESH design, supply and install a trace heating system to temperature maintain the internal hot water pipework at a minimum of +55ºC. Type H2OWAT55 self regulating heating cable was installed throughout to achieved the required temperature.

* Hot Water Temperature Maintenance *

Nestle, Burton On Trent (Part 2)

Frost protected three runs of external stainless steel pipework, including drinking, shower and soft water pipework. The system was designed using type FBTBOJ self regulating heating cable.

Nestle, Burton On Trent (Part 1)

One for the chocolate lovers! ESH supplied and installed a frost protection trace heating system to a little under 300 metres of external pipework. This comprised of various services of stainless steel pipework up to 76mm.

* Frost Protection Trace Heating *

Heinz, Telford

A saucey project right on the door step of ESH HQ. For this local job we were contracted to design, supply and install two trace heating systems to temperature maintain both a Glucose line at +40°C and a Caustic line at +20°C. Type VCBOJ constant wattage heating tape was straight traced onto both sets of pipework and temperature controlled using DTC digital thermostats.

* Process Temperature Maintenance Trace Heating *